Evertek V4 Nano
Recording the screen of your mobile/cell phone Evertek V4 Nano in a video with sound can be very useful to perform a tutorial or show an acquaintance how to perform certain tasks in an Evertek V4 Nano, save in a video file and then send it or upload it to a platform like YouTube or social networks.
Sometimes we would like to record on video with sound a story that we have seen on Instagram of an acquaintance, a phone call or video call with a family member to keep it as a souvenir or to use it as evidence or a TikTok video.
If, on the contrary, what you want is to take a screenshot of your Evertek V4 Nano in a still image instead of video, click on the following link and follow the indicated steps capture screen on Evertek V4 Nano.
To make this recording in your Evertek V4 Nano follow these steps:
Estimated time: 5 minutes.
1- First step:
First of all we are going to check that we have the screen recording icon in the quick access panel of our Evertek V4 Nano. (If we already have it, we can go to point 4).
To check it, we unlock our V4 Nano and slide a finger from the top edge of the screen down a few centimeters to display the quick panel in which the quick settings will appear such as connecting to a Wi-Fi network, connecting Bluetooth, mute, airplane mode, etc.
Slide down again with one finger to display the full panel, check if it has the screen recording icon shown below:
2- Second step:
If we do not see the screen recording icon on the quick panel of our Evertek V4 Nano click on the edit icon of the quick panel, which is normally the symbol of a pencil.
3- Third step:
The icons of the settings that we have already defined in the Evertek V4 Nano quick panel will appear above and below, separated by a horizontal line, the settings icons that we can add to the panel.
We look for the screen recording icon, click on the icon and without releasing it we drag to the top to add it to the quick panel.
If you do not see the screen recording icon on your V4 Nano device, it may be disabled by the manufacturer or not available on Evertek V4 Nano, in which case we go to the point “If we do not have the option to record screen natively”.
4- Fourth step:
We already have the screen recording icon on the Evertek V4 Nano quick panel, now to start recording we have two options: simultaneously press the volume up and power buttons of the V4 Nano or a simpler and less likely to fail which is to unfold the panel fast by sliding a finger from the top of the screen and pressing the screen recording icon that we have seen in the previous steps.
5- Fifth step:
In this step you can choose if you want the video to be saved with or without sound and if you want to show the touches you make on the screen. Select the options that interest you.
6- Sixth step:
By clicking on the "Record audio" drop-down icon you can choose if you want only the sound of the microphone to be recorded in the video (this is useful, for example, to explain how an app works to an acquaintance or to record a message while recording Evertek V4 Nano screen video), device audio only, or microphone sound and device audio at the same time.
If you do not want the video to have external sounds, you must record it in a noise-free environment.
7- Seventh step:
3-second countdown will be displayed at the top of the Evertek V4 Nano screen, from which the video of everything that happens on the screen will begin to be recorded.
8- Eighth step:
To stop recording, simultaneously press the volume up and power buttons again on your Evertek V4 Nano or click on "Stop" at the top left or right of the screen.
It may appear as a red square or circle or the word "Stop".
9- Ninth step:
The video will be automatically saved in the photo gallery of your Evertek V4 Nano. You can find the image gallery on the home screen, it should have a photo icon, an instant photo or depending on the version of the software installed, it is possible that your image gallery application is Google Photos, in this case look for the icon of a four-pointed star made of paper with four colors, one for each point.
In the event that the screen recording icon is not available and that simultaneously pressing the volume up and power buttons on the Evertek V4 Nano does not start the video recording, we will have to download an application from the application store to perform this action.
Your Evertek V4 Nano do not have Google Play or another apps store?
Check the following article to learn how to install applications without Google Play from alternative stores and how to install Google Play if your V4 Nano does not have it incorporated Google Play alternatives.
To do this we go to our application store either Play Store, Galaxy Store or any other that we use on our Evertek V4 Nano and search for “screen recorder”, we must bear in mind that any free application that we download will contain advertising, and we must not download any application that ask us for excessive permissions such as access to Bluetooth, contacts or the camera.
The permissions that will be required for any screen recording application are “Access to multimedia content and files”, the permission to “Record video and audio” and the “Show above” permission is optional if you want to have a floating window with the controls of record, microphone, stop, etc.
Once installed we can return to the first step of this tutorial.
You will be able to see the video of the screen recording in the photo gallery of your Evertek V4 Nano.