How to reboot an Intex Aqua Craze

If you notice that your Intex Aqua Craze hangs, stays frozen or "thinking" for a long time, it does not react, perhaps because it is overloaded and you have thought about restarting quickly to free up its 1 GB RAM RAM memory, in just three steps we will indicate you how to restart it.

A restart does not erase any data, it only consists of turning the device off and on again, if you want to erase all the content and restore the factory, consult the following tutorial: How to restore a Intex Aqua Craze.

Before restarting, you must bear in mind that you must know the PIN code of the SIM card and the unlock pattern or password of the Aqua Craze, since it will request it when it is turned on again.

Table of Contents:

Estimated time: 2 minutes.

1- First step:

Press and hold the power or unlock button on the Intex Aqua Craze until a screen with various options appears.

Press power button Android

2- Second step:

Among the options that are displayed on the screen of the Intex Aqua Craze we choose "Restart". If a confirmation message appears, press accept.

Restart Android

3- Third step:

The device will turn off and on again to perform the reboot, wait a few seconds or minutes. When it is turned on again, it will request the PIN code of the SIM card and the pattern, fingerprint or unlock code.

Restart screen Android

If the Aqua Craze power button does not work or activate the assistant.

1- First step:

First of all, we display the quick access or settings bar of your Intex Aqua Craze. To do this, with the Intex Aqua Craze unlocked, you can slide your finger from the top of the screen downwards, the shortcuts to device settings will be displayed.

Open Android quick panel

2- Second step:

Swipe a second time to fully display the shortcuts panel. You will see in the lower right part a button with the symbol to turn on / off, click on this button to continue.

Shut down/restart button on quick panel Android

3- Third step:

Several options will be displayed on the Intex Aqua Craze screen, including activating emergency mode, power off and the option we are looking for: "Restart". Click on the "Restart" button to continue.

Confirm restart Android

How to restart the Intex Aqua Craze if it is not responding?

If you cannot restart the Intex Aqua Craze since it is blocked and the previous method does not work, we must proceed to turn it off and turn it on again using the physical buttons.

To force a restart on your Intex press and hold the power button (or unlock button) for at least 8 seconds until the intex-aqua-craze or Android logo appears on the screen and release the button while it turns on again.

If the device still does not respond and you cannot restart it, it is possible that it is low on enough battery, in that case connect the Aqua Craze to its charger and try the procedure again.

If it continues without responding and does not turn on or has entered a loop, it is possible that some internal component such as the motherboard, memory, screen or even the power button has been damaged so you will have to repair it or resort to the warranty.

Video instructions

Has it been useful?

Questions and answers from users about "How to reboot / restart Intex Aqua Craze"

There are no questions yet about "How to reboot / restart Intex Aqua Craze"; you can write the first one.

You might be interested in:

Screenshot
Reset
Power Off
IMEI code
Serial number
Locate
Delete Google account
Configure mail
Install WhatsApp
Video calls
Send location
Record screen
Change language
Delete language
Frequently asked questions
Read QR codes
Device features