How to power off an Evertek EverMellow D50

If you need to turn off your Evertek EverMellow D50, either because you need to save battery at night, get on a plane, protect your privacy, or switch it off to take it in for repair and you don't know or remember how to do it, in a few simple steps we show you the instructions to completely turn off your device.

In recent updates to the Android operating system, the power button is no longer used to turn off the EverMellow D50, but has been replaced by the virtual assistant, so the shutdown option has been a little more hidden.

Table of Contents:

Estimated time: 2 minutes.

1- First step:

With the Evertek EverMellow D50 locked or unlocked, long press the power or unlock button until a screen with several options appears.

Press Android power button

2- Second step:

Among the options displayed on the screen of the Evertek EverMellow D50, choose "Power off". If a confirmation message appears, tap accept.

Android shutdown button

3- Third step:

The screen will go dark and the Evertek EverMellow D50 will turn off, wait a few seconds or minutes for the shutdown to complete. When it is turned on again, it will request the PIN code of the SIM card and the pattern, fingerprint or unlock code.

Screen turn off android

If the EverMellow D50 power button does not work or activate the assistant.

1- First step:

First of all, display the quick access or settings bar of your Evertek EverMellow D50. To do this, with the Evertek EverMellow D50 unlocked, you can slide your finger from the top of the screen downwards, the shortcuts to device settings will be displayed.

Open Android quick panel

2- Second step:

Swipe a second time to fully display the shortcuts panel. You will see in the lower right part a button with the symbol to turn on / off, click on this button to continue.

Shut down button on quick panel Android

3- Third step:

Several options will be displayed on the EverMellow D50 screen, including activating emergency mode, restarting, and the option you are looking for: "Turn off". Click on the "Turn off" button to continue.

Confirm shutdown Android

How to turn off Evertek EverMellow D50 if it is not responding?

If you cannot turn off the Evertek EverMellow D50 since it is blocked and the previous method does not work, you must proceed to turn it off and on again using the physical buttons.

To force shutdown your EverMellow D50 press and hold the power button (or unlock button) for at least 8 seconds until the Evertek or Android logo appears on the screen and release the button as it powers up again.

As a last resort, if you can't turn off the EverMellow D50 with any of the above methods and you need to turn it off, you should wait for the battery to run down. You can keep the screen on and do heavy usage to drain the battery faster.

If the device still does not respond, does not turn off, or is stuck in a loop, it may indicate a hardware issue, such as a malfunctioning motherboard, memory, screen, or power button. In this case, you may need to have it repaired or use your warranty.

Video instructions

Share this information:

Share on WhatsApp Share on Telegram

Has it been useful?

Questions and problems from users about "How to turn off an Evertek EverMellow D50 from the settings"

There are no questions yet about "How to turn off an Evertek EverMellow D50 from the settings"; you can write the first one.

You might be interested in:

IMEI code
Frequently asked questions
Read QR codes
Locate
Delete Google account
Record screen
Screenshot
Delete language
Change language
Install WhatsApp
Send location
Video calls
Reset
Restart
Device features