Apple Watch Sport 38mm
Estimated time: 2 minutes.
1- First step:
First of all we go to the application or screen to which you want to take the screen capture of your Apple Watch Sport 38mm, be it the health app, achievements, chat, stopwatch, etc.
2- Second step:
On your iPhone linked to the Apple Watch Sport 38mm, find the “Watch” application and press to open it. When you configure the Watch Sport 38mm for the first time this application is automatically installed on your iPhone.
3- Third step:
If you have several watches configured select the Watch Sport 38mm and scroll down until you find the “General” section, press to access.
4- Fourth step:
Scroll down through the general settings of the Watch Sport 38mm until you find the section “Enable screenshots”, if it is deactivated press to activate it. Once active you will not have to perform these first steps again, you can go to the next step directly.
5- Fifth step:
We return to the smartwatch. Press the side button and the “Digital Crown” wheel at the same time to take the screenshot and release both buttons at the same time. You will see a flash on the Watch Sport 38mm screen and a sound will play indicating that the screen capture has been taken correctly.
6- Sixth step:
The image captured from your Watch Sport 38mm will be stored in the linked iPhone, if you have selected the recent folder as shared with the Apple Watch Sport 38mm it will also appear in the Photos application of the smartwatch.
Has it been useful?
About the device:
Apple Watch Sport 38mm is a reloj / smartwatch / pulsera with dimensions of 38.6 x 33.3 x 10.5 mm (1.52 x 1.31 x 0.41 in), a weight of 25 grams, , a screen size of 1.5 inches (~55.1% screen-to-body ratio) and a screen resolution of 340 x 272 pixels (~290 ppi pixel density).
It has a processor 520 MHz, a graphics card PowerVR SGX543, a RAM memory 512 MB RAM and an internal memory of 8 GB.
The Apple Watch Sport 38mm comes from the factory with the watchOS 1.0| upgradable to 3.2.2 operating system.