Apple Watch Sport 42mm
Estimated time: 2 minutes.
1- First step:
First of all we go to the application or screen to which you want to take the screen capture of your Apple Watch Sport 42mm, be it the health app, achievements, chat, stopwatch, etc.
2- Second step:
On your iPhone linked to the Apple Watch Sport 42mm, find the "Watch" application and press to open it. When you configure the Watch Sport 42mm for the first time this application is automatically installed on your iPhone.
3- Third step:
If you have several watches configured select the Watch Sport 42mm and scroll down until you find the "General" section, press to access.
4- Fourth step:
Scroll down through the general settings of the Watch Sport 42mm until you find the section "Enable screenshots", if it is deactivated press to activate it. Once active you will not have to perform these first steps again, you can go to the next step directly.
5- Fifth step:
We return to the smart watch. Press the side button and the "Digital Crown" wheel at the same time to take the screenshot and release both buttons at the same time. You will see a flash on the Watch Sport 42mm screen and a sound will play indicating that the screen capture has been taken correctly.
6- Sixth step:
The image captured from your Watch Sport 42mm will be stored in the linked iPhone, if you have selected the recent folder as shared with the Apple Watch Sport 42mm it will also appear in the Photos application of the smartwatch.
About the device:
Apple Watch Sport 42mm is a device with a size of 42 x 35.9 x 10.5 mm (1.65 x 1.41 x 0.41 in), a weight of 30 grams, a screen size of 1.65 inches (~57.2% screen-to-body ratio) and a screen resolution of 390 x 312 pixels (~302 ppi pixel density).
It has a processor 520 MHz, a graphics card PowerVR SGX543, a RAM memory 512 MB RAM and an internal memory of 8 GB.
The Apple Watch Sport 42mm comes from the factory with the watchOS 1.0| upgradable to 3.2.2 operating system.
Has it been useful?