How to hard reset or fully wipe Beeline Pro 3

If your Beeline Pro 3 does not turn on, it does not react, it shows an error message when it turns on or you want to sell it, give it away or take it in for repair and you want to make sure that all the content stored in its internal memory is erased, you will have to force its restoration.

Forcing the restore or doing a “hard reset” is a drastic method that can be used when the Pro 3 settings cannot be accessed either because the password has been forgotten or the operating system is corrupted.

If you can access the settings of your Pro 3 and want to perform a restore, it is preferable to do so using the “Reset” method, otherwise continue reading to see step by step how to force the reset, format or do a “hard reset”.

This procedure erases all the content stored on the Pro 3 so if possible, you should make a backup copy of your data before proceeding and unlink the Google account.

Estimated time: 5 minutes.

1- First step:

First of all, turn off your Beeline Pro 3 completely. If you can't unlock the screen, press and hold the power button for about 20 seconds and the phone will turn off.

Power Off Beeline Pro 3

2- Second step:

Simultaneously press the power key and the volume key down on the Beeline Pro 3 for a few seconds. On some devices, depending on the Android version, the combination may be the power key and the volume key up.

Hard reset buttons

3- Third step:

When the Beeline logo is displayed, release the buttons. In the following menu, the touch screen does not work, so you must move through the menu with the volume up and volume down keys until you reach the option "Wipe data/factory reset" and press the power button to access it.

This menu is usually displayed in English, if the device menu appears in Chinese characters, see how to reset a mobile in Chinese.

Hard reset buttons

4- Fourth step:

A warning message will appear to avoid hard reset the Beeline Pro 3 by mistake. Use the Volume Up and Volume Down keys to select the "Yes" option and press the Power button to activate the option.

Menú Android Recovery

5- Fifth step:

After a few seconds, the formatting and deletion of all data from the Beeline Pro 3 will have been carried out, returning to its factory state, now it is necessary to restart the Pro 3 so using the volume up and volume down buttons we move to the option "Reboot system now" and press the power button to proceed to the restart.

Menú Android Recovery

Keep in mind that depending on the country, model and firmware updates of the Beeline Pro 3, the procedure may be slightly different.

If you have had problems performing a forced restore of the Pro 3 , consult the following articles with frequent problems that appear below, if you cannot find a solution to your problem, consult the section “Frequently Asked Questions about Beeline Pro 3” and leave your comment so that we can consult it and offer better service.

Share this information:

Share on WhatsApp Share on Telegram

Has it been useful?

Questions and answers from users about "Hard reset Beeline Pro 3 - Wipe data"

There are no questions yet about "Hard reset Beeline Pro 3 - Wipe data"; you can write the first one.

You might be interested in:

Screenshot
Reset
Restart
Power Off
IMEI code
Serial number
Locate
Delete Google account
Configure mail
Install WhatsApp
Video calls
Send location
Record screen
Change language
Delete language
Frequently asked questions
Read QR codes
Device features