How to hard reset or fully wipe Motorola ATRIX TV XT687

If your Motorola ATRIX TV XT687 does not turn on, it does not react, it shows an error message when it turns on or you want to sell it, give it away or take it in for repair and you want to make sure that all the content stored in its 512 MB internal memory is erased, you will have to force its restoration.

Forcing the restore or doing a “hard reset” is a drastic method that can be used when the ATRIX TV XT687 settings cannot be accessed either because the password has been forgotten or the operating system is corrupted.

If you can access the settings of your ATRIX TV XT687 and want to perform a restore, it is preferable to do so using the “Reset” method, otherwise continue reading to see step by step how to force the reset, format or do a “hard reset”.

This procedure erases all the content stored on the ATRIX TV XT687 so if possible, you should make a backup copy of your data before proceeding and unlink the Google account.

Estimated time: 5 minutes.

1- First step:

First of all, turn off your Motorola ATRIX TV XT687 completely. If you can't unlock the screen, press and hold the power button for about 20 seconds and the phone will turn off.

Power Off Motorola ATRIX TV XT687

2- Second step:

Simultaneously press the power key and the volume key down on the Motorola ATRIX TV XT687 for a few seconds. On some devices, depending on the Android version, the combination may be the power key and the volume key up.

Hard reset buttons

3- Second step:

If instead of the restore menu appearing, a screen similar to the following appears, you must use the volume up and volume down buttons to move through the menu since the touch screen does not work in this menu.

f, on the other hand, a screen appears with the text "Android Recovery" you can continue to step 6.

AP fastboot hard reset

4- Second step:

Using the volume buttons scroll until the "RECOVERY MODE" section appears and use the power button to access and continue with the factory reset of the Motorola ATRIX TV XT687.

Recovery mode AP fastboot

5- Second step:

If the text "No command" appears and an image of the Android mascot lying down with a red triangle containing a warning symbol inside, we must exit this mode using the buttons, it is a complicated process and it may not work at the same time. first but you must try several times until you get the correct combination and in the correct order.

Press the volume down and power buttons at the same time for 2-3 seconds, then press the volume up button and release.

No command AP fastboot

6- Third step:

In the following menu, the touch screen does not work, so you must move through the menu with the volume up and volume down keys until you reach the option "Wipe data/factory reset" and press the power button to access it.

This menu is usually displayed in English, if the device menu appears in Chinese characters, see how to reset a mobile in Chinese.

Hard reset buttons

7- Fourth step:

A warning message will appear to avoid hard reset the Motorola ATRIX TV XT687 by mistake. Use the Volume Up and Volume Down keys to select the "Yes" option and press the Power button to activate the option.

Menú Android Recovery

8- Fifth step:

After a few seconds, the formatting and deletion of all data from the Motorola ATRIX TV XT687 will have been carried out, returning to its factory state, now it is necessary to restart the ATRIX TV XT687 so using the volume up and volume down buttons we move to the option "Reboot system now" and press the power button to proceed to the restart.

Menú Android Recovery

Keep in mind that depending on the country, model and firmware updates of the Motorola ATRIX TV XT687, the procedure may be slightly different.

If you have had problems performing a forced restore of the ATRIX TV XT687 , consult the following articles with frequent problems that appear below, if you cannot find a solution to your problem, consult the section “Frequently Asked Questions about Motorola ATRIX TV XT687” and leave your comment so that we can consult it and offer better service.

Share this information:

Share on WhatsApp Share on Telegram

Has it been useful?

Questions and answers from users about "Hard reset Motorola ATRIX TV XT687 - Wipe data"

There are no questions yet about "Hard reset Motorola ATRIX TV XT687 - Wipe data"; you can write the first one.

You might be interested in:

Power Off
IMEI code
Serial number
Delete Google account
Configure mail
Install WhatsApp
Video calls
Send location
Record screen
Change language
Delete language
Frequently asked questions
Read QR codes
Device features