How to hard reset or fully wipe Wiko power u20

If your Wiko power u20 does not turn on, it does not react, it shows an error message when it turns on or you want to sell it, give it away or take it in for repair and you want to make sure that all the content stored in its 64 GB internal memory is erased, you will have to force its restoration.

Forcing the restore or doing a “hard reset” is a drastic method that can be used when the power u20 settings cannot be accessed either because the password has been forgotten or the operating system is corrupted.

If you can access the settings of your power u20 and want to perform a restore, it is preferable to do so using the “Reset” method, otherwise continue reading to see step by step how to force the reset, format or do a “hard reset”.

This procedure erases all the content stored on the power u20 so if possible, you should make a backup copy of your data before proceeding and unlink the Google account.

Estimated time: 5 minutes.

1- First step:

First of all, turn off your Wiko power u20 completely. If you can't unlock the screen, press and hold the power button for about 20 seconds and the phone will turn off.

Power Off Wiko power u20

2- Second step:

Simultaneously press the power key and the volume key down on the Wiko power u20 for a few seconds. On some devices, depending on the Android version, the combination may be the power key and the volume key up.

Hard reset buttons

3- Third step:

When the Wiko logo is displayed, release the buttons. In the following menu, the touch screen does not work, so you must move through the menu with the volume up and volume down keys until you reach the option "Wipe data/factory reset" and press the power button to access it.

This menu is usually displayed in English, if the device menu appears in Chinese characters, see how to reset a mobile in Chinese.

Hard reset buttons

4- Fourth step:

A warning message will appear to avoid hard reset the Wiko power u20 by mistake. Use the Volume Up and Volume Down keys to select the "Yes" option and press the Power button to activate the option.

Menú Android Recovery

5- Fifth step:

After a few seconds, the formatting and deletion of all data from the Wiko power u20 will have been carried out, returning to its factory state, now it is necessary to restart the power u20 so using the volume up and volume down buttons, move to the option "Reboot system now" and press the power button to proceed to the restart.

Menú Android Recovery

Keep in mind that depending on the country, model and firmware updates of the Wiko power u20, the procedure may be slightly different.

If you have had problems performing a forced restore of the power u20 , consult the following articles with frequent problems that appear below, if you cannot find a solution to your problem, consult the section “Frequently Asked Questions about Wiko power u20” and leave your comment so that we can consult it and offer better service.

Share this information:

Share on WhatsApp Share on Telegram

Has it been useful?

Questions and problems from users about "Hard reset Wiko power u20 - Wipe data"

There are no questions yet about "Hard reset Wiko power u20 - Wipe data"; you can write the first one.

You might be interested in:

Screenshot
Reset
Restart
Power Off
IMEI code
Serial number
Locate
Delete Google account
Configure mail
Install WhatsApp
Video calls
Send location
Record screen
Change language
Delete language
Frequently asked questions
Read QR codes
Device features